🚗 Silence the Noise, Amplify the Experience!
KILMAT 80 mil Car Sound Deadening Mat offers a robust 36 sqft of self-adhesive butyl insulation, designed for easy DIY installation. With a thickness of 80 mil and a weight of 0.5 lbs per square foot, it provides exceptional sound dampening performance. The unique installation indicator ensures a professional finish, making it the ideal choice for automotive enthusiasts looking to enhance their vehicle's audio experience.
Product Dimensions | 15.7"L x 9.8"W |
Global Trade Identification Number | 00857195006153 |
Manufacturer | KILMAT |
UPC | 857195006153 |
Part Number | KLM8036 |
Item Weight | 17 pounds |
Item model number | KLM8018 |
Batteries | 10 AA batteries required. |
Is Discontinued By Manufacturer | No |
Size | 36 sqft (3.4 sqm) |
Color | Silver With Logo Kilmat |
Style | 80 mil 36 sqft |
Item Package Quantity | 1 |
Special Features | Foil with KILMAT Logo, sound deadening, installation on clean and degreased surface, use roller during installation, vibro dampening, application from the interior side of a vehicle, automotive application, self-adhesive, wear gloves during installation, butyl based material, Thickness 80 mil=0.08 inch=2 mm, optimal weight and thickness, indicator of correct installation on the foil, soundproofing |
Included Components | Comes as a Combo Set |
Batteries Included? | No |
Batteries Required? | No |
Battery Cell Type | NiCAD |
B**R
A quality, cost effective sound deadening.
I bought a box of this deadener to do the liftgate on my 2015 Jeep Compass. I only have a 12” powered sub, not super loud or anything. I just wanted to reduce/eliminate rattles in the cargo area. I only put this on the plastic lift gate panel, but I might go back and put another layer on the metal.It’s thin enough where you can go over the holes where the plastic clips onto the metal door panel, and then partially cut the holes out to add some extra gripping power for the clips. Just make sure to cut/clear the holes out enough so the clips can go through without bending. But it’s still thick enough to work well to reduce vibrations.Would I use it in a vehicle with a huge system that needed extensive deadening? Maybe not for the main layer. There might be better products on the market for that. But as a secondary or alternative layer for smaller panels or areas? Absolutely. Or if your system is smaller like mine and your sound deadening needs are less severe, this product is just fine for you. Basically, you wanna approach your deadening like your system. If your system is high wattage, high dollar, don’t skimp on your deadening. Get the best product you can. If your system is budget or mid level, this product will work just fine for you if you use it right.I’d recommend buying a set of rollers in the 3 main sizes for sure. Putting on deadening without them is both difficult and less effective. And the different sizes make a huge difference, even for a smaller project like mine.
J**F
THe Kilmat is good
this sound deaden-er does a great job, I went with the 80mm too make sure it was flexible enough, it was.. works great, i went back and ran a second layer in some ares to be crazy!
A**R
Worth it
Great job on noise reduction and sound balancing for my truck. Doors are more solid and less road noise in cabin. Easy to trim to fit and application was pretty foolproof. 10/10 will use again
E**
Nice interior volume reduction and great product
Great product when applied correctly. Rolled out in two different cars and the end result was great. Prep and application are key, but take your time and it’ll do the trick.
P**O
.
Good stuff,i though they were bigger but not your fault lol
J**R
Great Quality
Great quality and ease of application.
J**N
Grear
Great product
J**O
Quieting Down NAS with WD Reds
I used this because I have a NAS with WD reds. Loud at large volumes. I covered the NAS in this (keeping all vents open) and it's fantastic. Not perfectly quiet, that will never happen but definitely worth it.
Trustpilot
5 days ago
2 days ago