MAHLE B32350 Engine Oil Filter Adapter Gasket

Direct fit and no leaks after install. Only time will tell how long it will last, but seems to be just as good as oem. Skin feel it will go a long time.

great quality and fast delivery

Fit perfectly. Was way more flexible and slightly thicker than the old gasket with 80,000 miles on it. Very difficult to see if oil is leaking from this joint but if it is it will get oil all over the block, power steering hoses, and everything else below. Repair while not super simple was not beyond many DIY abilities. This was installed on a 2004 BMW 330CI. This was my last shot at stopping the oil leak with the valve cover gasket and VANOS line being replaced first. I also purchased new belts figuring the ones on the car were original and glad I did. The main serpentine was old and very cracked. The idler pulley on the main belt also will need replacing, it is dry, tensioners were in great shape.I used a 1.25" open end wrench I had filing it slightly to fit the reverse thread fan clutch, worked perfect. A sharp tap with the hammer and it easy came loose. Other than removing the alternator, fan, radiator shroud, filter box to get to the oil filter housing and thus the gasket, it is a pretty straight forward job. Open the oil filter cap and let the oil drain down No need to drain the oil. You need to remove the top connection of the VANOS line to easy get the filter housing to easily move and get access to the gasket.

On my 03 325i. Easy repair, should’ve done it sooner.

Just like original

This gasket eventually fails by becoming stiff due to engine heat, this leaky gasket can contaminate the serpentine belt compromising the alternator and the water pump. Replace this gasket yourself and save hundreds. Totally doable if you can turn a wrench.

So far so good, material is good quality, it fits perfectly on my 01 BMW 330i. Gave it 4 starts only because I only had this for over a month so only time will tell how durable it actually is.NOTE: if you’re doing the job yourself BECAREFUL when you are tightening the housing bolts, it’s possible to cross thread the aluminum housing block. So go easy on it.

I made the mistake of buying a cheaper gasket for my e39. I had to replace it within 5 months as the cheap material failed and my filter housing began leaking again. I just recently installed this one, and could feel the difference while torquing it down. No leaks so far.

Installed this on my BMW e39. Was a perfect fit and so far I have no oil leaks.

Installed myself, fairly easy job if you have done jobs similar to it. Mostly removing other parts to get to location. Spent more time cleaning up the oil mess than replacing the gasket. Put everything back together and no more leaks from that area! Just wish I would have bought kit from fcpeuro as there is other things to replace while in there for a little extra money.

This gasket is a good product, perfect fit and stopped my oil leak!

Excellent product thanks

fits and it looks like the oem