ELEGOO PLA Filament 1.75mm Orange 1KG, 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Cardboard Spool(2.2lbs) 3D Printing Filament Fits for Most FDM 3D Printers

This 1kg spool of PLA filament performs flawlessly. The filament feeds smoothly with no tangles, and the diameter is consistent, which keeps prints accurate and trouble-free.Finished models have sharp detail, strong adhesion, and minimal stringing or warping. The spool arrived vacuum-sealed and dry, ready to use right out of the package.The full kilogram size is perfect for larger projects, offering great value without constant spool changes. Overall, a dependable filament that produces excellent results every time.

I can always count on Elegoo to work with my Bambu lab A1. I just use the generic pla profile and I have never had an issue with it. Works perfect, color is good, print time is reasonable and it never comes too wet. It’s always dry and prints good without strings and has good bed adhesion on the first layer. Solid choice, I would recommend it and definitely will bring buying more

This filament worked great—consistent feed, no tangles, and the purple color is vibrant and clean. Dimensional accuracy was spot on, and it adhered well to the bed with no warping. Ran through multiple prints with no issues.Bottom line:Reliable, high-quality PLA that delivers smooth results. Great value for everyday 3D printing! 💜🖨️

Update 10/04/2024: BACK AFTER 1 DAY SHY OF A YEAR! So it turns out the filament wasn't the issue, but was a hot end fan and a power supply fan that were causing the issue. Apparently they were both dying and not cooling the heat sync and/ or power supply adequately. Those were causing intermittant issues with almost all filaments other than one brand that starts with and O.This filament is printing really well currently, and havent had an issue with since doing a major overhaul of my entire hotend assembly and replacing the powersupply fan.5 Stars for Quality of the filament5 Stars for quality of the prints with the filament5 Stars for Elegoo Customer Service (Though they should get 10!)5 Stars for Elegoo all around from me!----------------------------------------------------------------------------------------------------------Update 10/05/23: If I could rate customer service at Elegoo, I would give it 5 stars! Very responsive, and willing to try to get issues taken care of in a timely manner. However, I am settling on a 2 star review of Elegoo's PLA and PLA+. I was sent 2 rolls of their PLA+ to replace the PLA rolls that I purchased, and spent the better part of 2 evenings experiencing the same issues that I originally had with their regular PLA (Under extrusion, clogging, etc.). I even went back and used my filament drier on both of the previously purchased rolls of PLA for 60 hours each, and still am unable to print with them. I love Elegoo, and will always recommend their resin/resin printers, but I can not recommend their filament at this time. I'm going to try to dry out the PLA+ rolls for 80 hours each and see if that makes a difference.Update 09/25/23: Adding 2 stars to my original review. Elegoo customer service was super quick and friendly with a response and reached out to me to offer an option to replace or refund my purchase. I chose to have them replace the rolls, and they stated that they would be sending out their PLA+. Will update review again once I get a chance to test out the new rolls!I bought 2 spools of the black, and printed just fine through half of the first one. Then I started havingissues with adhesion, under extrusion, and clogs in my hot end. I was printing at 205C, and leved the bed between each failed print just to rule those 2 factors out. I even tried to increase the temp, but still had print failure after print failure. So I thought maybe the filament had taken on some moisture. I opened the second roll, and the SAME issues developed.I love most other Elegoo products, but would steer clear of this filament for now.

UPDATED REVIEW:TLDR:1. BUY ELEGOO FILAMENT. Great prices, great filament, great quality… AFTER DRYING2. GET A FILAMENT DRYER. Even if filament comes dry, it WILL absorb moisture. EVEN PLA!3. LEARN BRIMS/MOUSE EARS for anything that is skinny and tallThe Elegoo red PLA worked beautifully from day 1, but the blue wasted SO many hours of my time. Stringing like mozzarella, and non-adhesion/falling off mid-print. I dried the blue filament thoroughly (24 hr total), and it works beautifully now. ELEGOO is a GREAT VALUE if you have a filament dryer!!! I started the return process, but I'm keeping it, and I will definitely buy again. Elegoo reached out and offered a full refund, but I declined. On second thought, I deserve pain & suffering compensation, I'm going to ask for that refund. LOLLONG VERSION:3D printing is a mysterious blend of science and art. When it works, everything has to be JUST so. When it fails, it could be almost anything, and it's not always just one thing that's wrong.My first print was a pre supported Pokemon Charizard that failed 4-5 times in a row, super stringy and supports coming loose early in the print. So I tried printing it using Bambu Lab PLA, and that failed too. Then I knew it wasn't (just) the Elegoo blue PLA. So I washed the Bambu Lab textured PEI plate w/ Dawn, used glue stick, still failed. Then I looked at the long skinny supports w/ tiny brims, and thought "that's not a great idea." I got the same model w/o supports and added tree style slim supports with wider brims, and it printed beautifully w/ Bambu Lab PLA. BUT it still failed w/ Elegoo blue (see mangled Charizard photo).At that point I was so frustrated I left a 1 star review and started the return process with Amazon. I didn't think it was moisture since I didn't see bubbling or hear hissing (but the Bambu Lab fans are LOUD), plus other reviewers said drying only improved prints a little. But I figured, I need a filament dryer anyway, why not try drying it?I used the Sovol 2-spool dryer at 50 °C for 6 hr x 4 sessions w/ just this blue roll in it. Twice when the dryer cooled I had to remove a LOT of condensation. The next two sessions produced no visible condensation, ending at 50 °C at 30% humidity (We're at 65% relative humidity in San Diego currently).ZERO print failures since drying the filament. I've printed the same Charizard, flawless, almost no stringing. I printed a tiny Blue from Netflix's Sea Beast, micro-mini cars that are part of surprise egg sets from Thingiverse. Look at all of that crisp clean detail! (I like to print at 0.08-0.12 mm layer heights for miniatures and variable layer heights for larger models.)The printing is flawless. Removing supports and brims? NOT flawless (freaking PITA), but not Elegoo's fault LOL. I will definitely buy Elegoo again, it's a great bargain. But dry it before using!PREVIOUS REVIEW:I was super excited to discover this 4.5-star PLA filament for such a reasonable price! But try as I might, this filament will not adhere to the print bed, nor will it stick to other layers of itself. There is no evidence of moisture, as there is no audible hissing or popping, no visible bubbling or steaming. It does not string much at all, and where it did adhere, it prints just fine and smooth. See attached photo that shows mangled mouth/jaw, wings, right arm; what isn't showing is that half the supports initially adhered, but later came off the platform.I tried everything:- textured PEI print plate- washed print plate with mild detergent and water- glue stick on print plate- hotend fan on- 220 °C hotend- 65 °C print bedI'm printing this on an almost new Bambu Lab P1P, a very capable, reliable machine that has produced flawless prints using filaments from Bambu Lab, Overture, and TEQstone using a 0.4 mm nozzle and layer heights of 0.08 to 0.2 mm.I am returning these and going to get more expensive PLA filament. My free time is worth more than the savings!

Never had any problems with this filament. Works well within its labelled printing temps. Can absorb a good amount of moisture in the air before experiencing print issues, so I’d say it holds up well. Enclosed printers and hotbeds have never given me issues with heat creep etc. when using this brand of filament, which is rare for PLA, in my experience. Ive used a lot of different brands of PLA, but elegoo is my go to.